Building Component Testing Equipment

Comply with ISO 5658-2 standards,It is suitable for testing the surface characteristics of flat single materials, composite materials or components used on exposed surfaces of buildings and transportation vehicles (such as ships, trains, etc.), and tubular products through special installation and fixing.

This Combustion Tester Equipment Comply with ISO 1716-2002 standards,The test of determination of the heat of combustion of building products at constant volume in a bomb calorimeter including gross heat and net heat of combustion.

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

Building Material Flammability Test Apparatus Comply with ISO11925-2:2020,suitable for judging whether building materials have flammability test method under specified conditions.

Burning calorific value test equipment for building materials and products Comply with the test standards of ISO 1716-2002 "Reaction to fire test for building materials and products—Determination of the heat of combustion".

The FMVSS 302 - Automotive Interior Materials Combustion Tester is a specialized device designed to evaluate the flammability of automotive interior materials in compliance with federal safety standards. This apparatus subjects material samples to a standardized flame source, measuring key parameters such as ignition time, flame spread rate, and heat release.

The Fire Resistance Test Furnace suitable for the test of thermal insulation performance deviation and thermal insulation performance attenuation of steel structure fire retardant coatings.

(SBI) Test Apparatus Complies with EN 13823:2002 Reaction to fire tests for building products—Building products excluding floorings exposed to the thermal attack by a single burning item.

Ventilation and Rain Resistance Testing Machine for Building Louvers is an apparatus water penetration resistance of louvers in compliance with AS4740 standards. This system simulates wind-driven rain conditions and measures louver effectiveness in restricting water ingress while maintaining optimal ventilation rates. 

The Material Smoke Toxicity Hazard Classification Tester is a specialized instrument used to assess the toxicity of smoke produced when materials are burned. It is designed to measure and classify the hazardous components of smoke, such as toxic gases, that can pose risks to human health during fires

 Flame Propagation Apparatus (FPA) measures the combustion characteristics of materials. The main measurement parameters are ignition time (Tign), mass loss rate (m), chemical (Qchem) heat release rate, convective (Qc) heat release rate, effective heat of combustion (EHC), and smoke generation rate. 

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries.