Fire Equipment Testing Equipment

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

Comply with ISO 11601:2017,It is suitable for the driving performance test of the trolley fire extinguisher.

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

This Hydraulic Pressure Comprehensive Testing Machine is suitable for fire hose test with hose specifications of 25, 40, 50, 65, 80, 100, 125, 150, 200. 

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for fire-fighting soft reel and fire-fighting water gun spray test.This equipment only includes fire hose reel jet test, fire water gun jet test and flow test;

This Hydraulic Pressure Test Machine For Fire Extinguisher is suitable for water pressure sealing and strength test of sprinkler.

Compliant with ISO 2592 standards It is suitable for the determination of flash and fire points of petroleum products by the Cleveland open cup method. Flash point and fire point are used to evaluate the flammability and combustibility of substances.

It is suitable for the drop test of the flammable gas detector.The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm; 

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

Applicable to sprinkler flow coefficient measurement.This equipment only provides sprinkler test device with nominal flow coefficient less than or equal to 115 as standard;

This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.

It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;

This Air Leak Testing Machine is suitable for the air tightness test of the pressure indicator of the gas fire extinguishing system;