All Products

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

Building Material Flammability Test Apparatus Comply with ISO11925-2:2020,suitable for judging whether building materials have flammability test method under specified conditions.

Burning calorific value test equipment for building materials and products Comply with the test standards of ISO 1716-2002 "Reaction to fire test for building materials and products—Determination of the heat of combustion".

The FMVSS 302 - Automotive Interior Materials Combustion Tester is a specialized device designed to evaluate the flammability of automotive interior materials in compliance with federal safety standards. This apparatus subjects material samples to a standardized flame source, measuring key parameters such as ignition time, flame spread rate, and heat release.

The Fire Resistance Test Furnace suitable for the test of thermal insulation performance deviation and thermal insulation performance attenuation of steel structure fire retardant coatings.

(SBI) Test Apparatus Complies with EN 13823:2002 Reaction to fire tests for building products—Building products excluding floorings exposed to the thermal attack by a single burning item.

Ventilation and Rain Resistance Testing Machine for Building Louvers is an apparatus water penetration resistance of louvers in compliance with AS4740 standards. This system simulates wind-driven rain conditions and measures louver effectiveness in restricting water ingress while maintaining optimal ventilation rates. 

The Material Smoke Toxicity Hazard Classification Tester is a specialized instrument used to assess the toxicity of smoke produced when materials are burned. It is designed to measure and classify the hazardous components of smoke, such as toxic gases, that can pose risks to human health during fires

Foam Fire Extinguishing Agent Test Apparatus designed to evaluate the fire-suppression effectiveness, expansion ratio, and drainage characteristics of foam-based fire extinguishing agents. It operates by simulating fire scenarios and quantifying the foam's ability to smother and cool flames, thus assessing its suitability for various fire hazard classes. 

designed for self-rescue in fire situations. These devices are intended for individuals escaping from hazardous environments filled with smoke and toxic gases.

This test applies to the thermal protective performance of single or multilayer materials, used for evaluating the thermal protective materials of personnel exposed to convective and radiant heat hazards. It is not applicable to materials that are non-flame-retardant, or those that melt, drip, or degrade when exposed to high temperatures

The "Sprinkler Dynamic Thermal Testing Device" is a specialized piece of equipment used to evaluate the performance and response of fire sprinklers under dynamic thermal conditions. Complies with ISO 6182-1: 2021 Section 7.18 "Sensitivity Test—Response Time Index (RTI)".