Test Apparatus

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

Comply with ISO 11601:2017,It is suitable for the driving performance test of the trolley fire extinguisher.

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for the drop test of the flammable gas detector.The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm; 

Cone Calorimeter Comply with ISO 9705,ISO 5660 standards,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models.

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

It is suitable for the combustion performance test of non-metallic materials in the aircraft cabin,Comply with the standard requirements of FAR25.853.

This Combustion Testing Equipment suitable for the non-prolonged combustion performance of aviation and aerospace wires and cables under the direct combustion of the specified fire source.

Safety Nets Flame Retardant Tester is suitable for the determination of the combustion performance of various Fabrics Burning Test when the vertical bottom edge is ignited.

This Extrusion Test Apparatus Comply with UL758-2016,Suitable for 20AWG~14AWG insulated wire anti-extrusion test.

This Flammability Tester Comply with ASTM D3014-04a, ISO 3582, UL94 HBF, HF-1, HF-2 test standards.It is suitable for evaluating the vertical combustion performance of rigid foam plastics under laboratory conditions and specifies the vertical combustion method to determine the combustion performance of rigid foam plastics.

Comply with ISO 5658-2 standards,It is suitable for testing the surface characteristics of flat single materials, composite materials or components used on exposed surfaces of buildings and transportation vehicles (such as ships, trains, etc.), and tubular products through special installation and fixing.

This Combustion Tester Equipment Comply with ISO 1716-2002 standards,The test of determination of the heat of combustion of building products at constant volume in a bomb calorimeter including gross heat and net heat of combustion.

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.