fire

The Building Material Ignitability Fire Tester Comply with the standard requirements of ISO5657-1997 "Reaction to fire tests—Ignitability of building products using a radiant heat source"

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.

This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.

Cone Calorimeter Comply with ISO 9705,ISO 5660 standards,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models.

It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;

The Vertical Fire Resistance Test Furnace ,suitable for evaluating the fire resistance of products such as fire doors installed at the openings of vertical partition members, fire shutter assemblies, fire bricks, fire glass, fire partition walls and fire windows.

Foam Fire Extinguishing Agent Test Apparatus designed to evaluate the fire-suppression effectiveness, expansion ratio, and drainage characteristics of foam-based fire extinguishing agents. It operates by simulating fire scenarios and quantifying the foam's ability to smother and cool flames, thus assessing its suitability for various fire hazard classes. 

The FMVSS 302 - Automotive Interior Materials Combustion Tester is a specialized device designed to evaluate the flammability of automotive interior materials in compliance with federal safety standards. This apparatus subjects material samples to a standardized flame source, measuring key parameters such as ignition time, flame spread rate, and heat release. It provides critical data on the combustion characteristics of materials used in seating, dashboards, and other interior components, ensuring that they meet stringent fire safety regulations to enhance passenger protection in the event of a fire.

designed for self-rescue in fire situations. These devices are intended for individuals escaping from hazardous environments filled with smoke and toxic gases.

The "Sprinkler Dynamic Thermal Testing Device" is a specialized piece of equipment used to evaluate the performance and response of fire sprinklers under dynamic thermal conditions. Complies with ISO 6182-1: 2021 Section 7.18 "Sensitivity Test—Response Time Index (RTI)".

Fire testing laboratories are specialized facilities dedicated to evaluating the performance of building materials and products under fire conditions. ZONSKY can provide the equipment needed by the fire test laboratory. You only need to provide the standard

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries. 

This Vibration Impact Test Machine Compliant with ISO 7165:2009 standards,It is suitable for the vibration impact test of 1~12kg portable fire extinguishers.