test

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

This Bending Test Apparatus Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.Compliance with TUV 2PFG2577-08.16, DIN VDE 0295, and the standard CRIA 0003.2-2016.

Combustion Test Equipment is suitable for testing the flame retardant properties of the insulating layer of wires and cables under abnormal conditions such as overheating and overcurrent.suitable for UL1581, UL13, UL444, UL1655 VW-1 and FT-1, FT-2 of CSA.

This Steiner Horizontal Tunnel Furnace is suitable for CMP grade wire and cable and optical cable air duct test.Comply with UL758 standards.

This equipment complies with IEC 60060-1 standards,Test the high voltage test of the insulation layer of large wire and cable and coiled wire and cable.

Oil Resistance Testing Machine is suitable for the oil resistance test of plastic with paint cables and insulation. Comply with UL, VDE, CSA, JIS and other standards.

this machine is a four -site design of the front and rear,Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.

This Carbon Black Testing Equipment Comply with IEC60811-4-1:2004 standard,Inner diameter and length of quartz tube: Φ30×(400±50) mm;

Extruded oversheaths abrasion test apparatus" refers to a testing device used to assess the abrasion resistance of extruded oversheaths, which are protective coverings typically applied to cables or wires. This apparatus is designed to evaluate how well these oversheaths withstand wear and tear

The Tensile Test Apparatus Comply with IEC60811-1-4:1985 and other test standards. It is suitable for testing the tensile properties of wire and cable, rubber, plastic and other insulating sheaths in low temperature environment.

The Mineral Insulated Cable Flattening Test Equipment Comply with IEC60702-1: 2002 test standard. Applicable to mineral insulation flattening test of copper core copper or copper alloy sheath with diameter less than 25mm rated voltage 500V and 750V.

It is suitable for the maximum flattening force of 2 tons, the diameter is less than 10mm, and the rated voltage is 500V and 750V copper core copper or copper alloy sheathed mineral insulation flattening test.Comply with IEC 60702-1:2002 test standard.

Comply with IEC60227-1:2007, IEC60227-2:2003 test standard.It is suitable for the load breaking test of various copper-clad soft wires. Take a flexible cord sample of appropriate length, install one end on a rigid support, and hang a heavy hammer of 0.5kg from the sample at a distance of 0.5m below the support point. When the conductor passes。

Thermal Stability Test Apparatus Comply with IEC 60811-3-2: 1985 test standard requirements.It is applicable to the insulation and sheath test of polyvinyl chloride compound for wire and cable.

Salt Spray Test Machine is aimed at the surface treatment of various materials.tests the corrosion resistance of its products.This product meets GJB150, DIN50021 continuous salt spray and other international standards;