tester

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

Compliant with ISO 2592 standards It is suitable for the determination of flash and fire points of petroleum products by the Cleveland open cup method. Flash point and fire point are used to evaluate the flammability and combustibility of substances.

This Automatic Pensky Martens Closed Cup Flash Point Tester Comply with ISO 2719-2016 and ASTM D93-2018 standards,It is suitable for determining the flash point of flammable liquids, liquids with suspended particles, liquids whose surface tends to form a film under test conditions, and other liquids by the Pensky-Martin closed cup method. 

The Building Material Ignitability Fire Tester Comply with the standard requirements of ISO5657-1997 "Reaction to fire tests—Ignitability of building products using a radiant heat source"

It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

Meet the requirements of the ASTM D4151-2010,It is used to test the flame retardant properties of bed blanket fabrics and the flame spread properties on the surface of the fabrics. 

Safety Nets Flame Retardant Tester is suitable for the determination of the combustion performance of various Fabrics Burning Test when the vertical bottom edge is ignited.

Comply with the test standard of ISO 9239 and ASTM E648,This test method is applicable to all kinds of flooring materials,Such as: textile carpet, soft wooden board, wood board, rubber board and plastic floor and floor spraying material. 

Standard to American Fire Protection Association (NFPA) NFPA 701:2004 Test Method. It can be applied to single or multi-layer fabrics, but not for fabrics with a weight greater than 700 g/m2 (21 oz/yd2). 

The Flame Retardant Tester Comply with UL1581 standards,It is suitable for wire and cable insulation flame resistance test;