testing

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

This Hydraulic Pressure Comprehensive Testing Machine is suitable for fire hose test with hose specifications of 25, 40, 50, 65, 80, 100, 125, 150, 200. 

Suitable for industrial and commercial use point type combustible gas detectors, household combustible gas detectors, industrial and commercial portable combustible gas detectors, household and small catering kitchen gas alarms and sensors, household gas alarms and sensors. functional tests in high and low temperature, humid and hot environments;

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for fire-fighting soft reel and fire-fighting water gun spray test.This equipment only includes fire hose reel jet test, fire water gun jet test and flow test;

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

This Hydraulic Pressure Test Machine For Fire Extinguisher is suitable for water pressure sealing and strength test of sprinkler.

It is suitable for the drop test of the flammable gas detector.The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm; 

The Building Material Ignitability Fire Tester Comply with the standard requirements of ISO5657-1997 "Reaction to fire tests—Ignitability of building products using a radiant heat source"

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.

This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.

It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;

Electronic Tensile Testing Machine can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).