ul

It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

Electronic Tensile Testing Machine can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).

This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.

This Steiner Horizontal Tunnel Furnace is suitable for CMP grade wire and cable and optical cable air duct test.Comply with UL758 standards.

Ventilation and Rain Resistance Testing Machine for Building Louvers is an apparatus water penetration resistance of louvers in compliance with AS4740 standards. This system simulates wind-driven rain conditions and measures louver effectiveness in restricting water ingress while maintaining optimal ventilation rates. 

Foam Fire Extinguishing Agent Test Apparatus designed to evaluate the fire-suppression effectiveness, expansion ratio, and drainage characteristics of foam-based fire extinguishing agents. It operates by simulating fire scenarios and quantifying the foam's ability to smother and cool flames, thus assessing its suitability for various fire hazard classes. 

The FMVSS 302 - Automotive Interior Materials Combustion Tester is a specialized device designed to evaluate the flammability of automotive interior materials in compliance with federal safety standards. This apparatus subjects material samples to a standardized flame source, measuring key parameters such as ignition time, flame spread rate, and heat release. It provides critical data on the combustion characteristics of materials used in seating, dashboards, and other interior components, ensuring that they meet stringent fire safety regulations to enhance passenger protection in the event of a fire.

This test applies to the thermal protective performance of single or multilayer materials, used for evaluating the thermal protective materials of personnel exposed to convective and radiant heat hazards. It is not applicable to materials that are non-flame-retardant, or those that melt, drip, or degrade when exposed to high temperatures

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries. 

This equipment complies with IEC 60060-1 standards,Test the high voltage test of the insulation layer of large wire and cable and coiled wire and cable.

The Tensile Test Apparatus Comply with IEC60811-1-4:1985 and other test standards. It is suitable for testing the tensile properties of wire and cable, rubber, plastic and other insulating sheaths in low temperature environment.

The Mineral Insulated Cable Flattening Test Equipment Comply with IEC60702-1: 2002 test standard. Applicable to mineral insulation flattening test of copper core copper or copper alloy sheath with diameter less than 25mm rated voltage 500V and 750V.

It is suitable for the maximum flattening force of 2 tons, the diameter is less than 10mm, and the rated voltage is 500V and 750V copper core copper or copper alloy sheathed mineral insulation flattening test.Comply with IEC 60702-1:2002 test standard.

Standard to American Fire Protection Association (NFPA) NFPA 701:2004 Test Method. It can be applied to single or multi-layer fabrics, but not for fabrics with a weight greater than 700 g/m2 (21 oz/yd2). 

It is suitable for the electrical insulation performance test of fire helmets.