test

Comply with the standard requirements of ISO19700-2006,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

It is suitable for the drop test of the flammable gas detector.The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm; 

Oil Resistance Testing Machine is suitable for the oil resistance test of plastic with paint cables and insulation. Comply with UL, VDE, CSA, JIS and other standards.

this machine is a four -site design of the front and rear,Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.

The Fire Resistance Test Furnace suitable for the test of thermal insulation performance deviation and thermal insulation performance attenuation of steel structure fire retardant coatings.

This Tracking Test Equipment Compliant with IEC60587:2007 standards,suitable for evaluating tests using electrical insulating materials under severe environmental conditions by measuring resistance to tracking and corrosion with liquid contaminants and sloped specimens.

This Bending Test Apparatus Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.Compliance with TUV 2PFG2577-08.16, DIN VDE 0295, and the standard CRIA 0003.2-2016.

Combustion Test Equipment is suitable for testing the flame retardant properties of the insulating layer of wires and cables under abnormal conditions such as overheating and overcurrent.suitable for UL1581, UL13, UL444, UL1655 VW-1 and FT-1, FT-2 of CSA.

The Building Material Ignitability Fire Tester Comply with the standard requirements of ISO5657-1997 "Reaction to fire tests—Ignitability of building products using a radiant heat source"

This Carbon Black Testing Equipment Comply with IEC60811-4-1:2004 standard,Inner diameter and length of quartz tube: Φ30×(400±50) mm;

It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

Electronic Tensile Testing Machine can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.

Applicable to sprinkler flow coefficient measurement.This equipment only provides sprinkler test device with nominal flow coefficient less than or equal to 115 as standard;