test apparatus

The Limiting Oxygen Index Test Apparatus meets the requirements of ISO4589-3:2017, suitable for evaluating the combustion performance of materials such as solid, laminated, foams, soft flakes and thin films under specified environments.

The Building Materials Non Combustibility Test Apparatus Comply with ISO1182:2002 test standard.to determine whether the building material is non-flammable under the specified conditions.

Building Material Flammability Test Apparatus Comply with ISO11925-2:2020,suitable for judging whether building materials have flammability test method under specified conditions.

this machine Conform to ASTM D3806 standard Applicable to the determination of flame propagation performance of decorative fire retardant paints.

This Crash Test Equipment Comply with IEC 61779: 2003,It is suitable for the collision performance test of combustible gas alarm controller and special fire detector.

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

Salt spray corrosion test apparatus is aimed at the surface treatment of various materials. It contains hardware electroplating, hardware, electronic parts, chemical coatings, baking paint, cars, motorcycles, hardware cleaning tools, screws, springs...

When the building partition is subjected to the fire resistance test according to the fire resistance test method specified in ISO 834-1, the water spray impact test shall be additionally carried out as required.

Thermal Stability Test Apparatus Comply with IEC 60811-3-2: 1985 test standard requirements.It is applicable to the insulation and sheath test of polyvinyl chloride compound for wire and cable.

This Extrusion Test Apparatus Comply with UL758-2016,Suitable for 20AWG~14AWG insulated wire anti-extrusion test.

This Impact Testing Machine Comply with DIN 14521-1987、NF S61-820-1/IN12010、NF S61-820-2/IN12010 standards, It applies to the requirements of impact test for fire extinguishers of different capacities.

This Flammability Tester Comply with ASTM D3014-04a, ISO 3582, UL94 HBF, HF-1, HF-2 test standards.It is suitable for evaluating the vertical combustion performance of rigid foam plastics under laboratory conditions and specifies the vertical combustion method to determine the combustion performance of rigid foam plastics.

This Bending Test Machine is suitable for lining fire hose and fire hose bendability test and fire hose test with hose specifications of 25, 40, 50, 65, 80 and 100. 

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

It can perform tests on national or international standards such as ISO, ASTM, BS, DIN, JIS, etc.It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests ( Optional functions, additional fees).