tester

It is suitable for the maximum flattening force of 2 tons, the diameter is less than 10mm, and the rated voltage is 500V and 750V copper core copper or copper alloy sheathed mineral insulation flattening test.Comply with IEC 60702-1:2002 test standard.

Comply with IEC60227-1:2007, IEC60227-2:2003 test standard.It is suitable for the load breaking test of various copper-clad soft wires. Take a flexible cord sample of appropriate length, install one end on a rigid support, and hang a heavy hammer of 0.5kg from the sample at a distance of 0.5m below the support point. When the conductor passes。

Standard to American Fire Protection Association (NFPA) NFPA 701:2004 Test Method. It can be applied to single or multi-layer fabrics, but not for fabrics with a weight greater than 700 g/m2 (21 oz/yd2). 

Applicable to the adhesion strength test between fire hose linings (or outer cladding), that is, adhesion strength, elongation at break and strength at break test;

The Flammability Tester suitable for testing the flammability performance of various fabrics and their products by igniting the surface in a 45° direction, and for grading the burning performance.

Burning calorific value test equipment for building materials and products Comply with the test standards of ISO 1716-2002 "Reaction to fire test for building materials and products—Determination of the heat of combustion".

this machine Conform to ASTM D3806 standard Applicable to the determination of flame propagation performance of decorative fire retardant paints.

Fire Retardant Paint Testing Machine(small chamber method) is suitable for testing the fire-retardant performance of fire-resistant paints painted on the surface of combustible substrates under laboratory conditions.

Salt spray corrosion test apparatus is aimed at the surface treatment of various materials. It contains hardware electroplating, hardware, electronic parts, chemical coatings, baking paint, cars, motorcycles, hardware cleaning tools, screws, springs...

Safety Nets Flame Retardant Tester is suitable for the determination of the combustion performance of various Fabrics Burning Test when the vertical bottom edge is ignited.

When the building partition is subjected to the fire resistance test according to the fire resistance test method specified in ISO 834-1, the water spray impact test shall be additionally carried out as required.

Flex Tester Machine Meet the standard requirements of UL 1581. After 15,000 reciprocating movements of the flexible cable used to detect rubber insulation and sheath, that is, 30,000 single-way movements, neither current interruption nor short circuit between conductors should occur.

This Impact Testing Machine Comply with DIN 14521-1987、NF S61-820-1/IN12010、NF S61-820-2/IN12010 standards, It applies to the requirements of impact test for fire extinguishers of different capacities.

This Flammability Tester Comply with ASTM D3014-04a, ISO 3582, UL94 HBF, HF-1, HF-2 test standards.It is suitable for evaluating the vertical combustion performance of rigid foam plastics under laboratory conditions and specifies the vertical combustion method to determine the combustion performance of rigid foam plastics.

The Flame Retardant Tester Comply with UL1581 standards,It is suitable for wire and cable insulation flame resistance test;