test

The Building Material Ignitability Fire Tester Comply with the standard requirements of ISO5657-1997 "Reaction to fire tests—Ignitability of building products using a radiant heat source"

It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.

Applicable to sprinkler flow coefficient measurement.This equipment only provides sprinkler test device with nominal flow coefficient less than or equal to 115 as standard;

This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.

Cone Calorimeter Comply with ISO 9705,ISO 5660 standards,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models.

It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

Electronic Tensile Testing Machine can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).

It is suitable for the combustion performance test of non-metallic materials in the aircraft cabin,Comply with the standard requirements of FAR25.853.

This Combustion Testing Equipment suitable for the non-prolonged combustion performance of aviation and aerospace wires and cables under the direct combustion of the specified fire source.

Meet the requirements of the ASTM D4151-2010,It is used to test the flame retardant properties of bed blanket fabrics and the flame spread properties on the surface of the fabrics. 

Safety Nets Flame Retardant Tester is suitable for the determination of the combustion performance of various Fabrics Burning Test when the vertical bottom edge is ignited.