testing

The Testing Machine Comply with UL758 standards,This equipment is used to test the degree of thermal deformation of materials such as plastics and wire rubber.

Flex Tester Machine Meet the standard requirements of UL 1581. After 15,000 reciprocating movements of the flexible cable used to detect rubber insulation and sheath, that is, 30,000 single-way movements, neither current interruption nor short circuit between conductors should occur.

This Impact Testing Machine Comply with DIN 14521-1987、NF S61-820-1/IN12010、NF S61-820-2/IN12010 standards, It applies to the requirements of impact test for fire extinguishers of different capacities.

This Flammability Tester Comply with ASTM D3014-04a, ISO 3582, UL94 HBF, HF-1, HF-2 test standards.It is suitable for evaluating the vertical combustion performance of rigid foam plastics under laboratory conditions and specifies the vertical combustion method to determine the combustion performance of rigid foam plastics.

It is suitable for the impulse shock resistance test of fire emergency lights.

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

It can perform tests on national or international standards such as ISO, ASTM, BS, DIN, JIS, etc.It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests ( Optional functions, additional fees).

This Air Tightness Tester is suitable for the air tightness test of cart-type fire extinguishers and portable fire extinguishers within 50kg.

It is suitable for the static operating temperature test of sprinklers.Sprinklers whose operating temperature does not exceed 79°C shall use a water bath, and those whose nominal operating temperature shall exceed 79°C shall use an oil bath.

Comply with ISO 7165 and ISO 11601 standard,It is suitable for electrical insulation performance test of water-based fire extinguisher when spraying.

It is suitable for the air tightness test of the pressure indicator of the gas fire extinguishing system;

Fire resistance testing apparatus for grooved fittings in automatic sprinkler systems. It is widely used in the production inspection and development research of various fire hoses in production factories, product quality inspection institutes, scientific research institutions and other units, and other similar product related tests.

Impact Testing Machine Comply with Section 1400 of UL1581-2016 and Section 7.13.2 of UL2556-2015 and Figure 16.Applicable to the verification of the impact resistance of insulation and/or covering wires and cables when struck by a free-falling weight.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

This Testing equipment Comply with DIN 14521-1987 standards ,it is suitable for the sealing performance, pressure resistance performance, outer diameter expansion rate and axial elongation rate test of fire hose reels of water, dry powder and foam fire extinguishing agents.