test

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries. 

It can perform tests on national or international standards such as GB, ISO, ASTM, BS, DIN, JIS, etc. It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests

This Vibration Impact Test Machine Compliant with ISO 7165:2009 standards,It is suitable for the vibration impact test of 1~12kg portable fire extinguishers.

This Resistance To Corrosion Performance Test Apparatus Comply with IEC 60068-2-11:2021,ASTM G85-02,ISO 7165-2009 standards,Used in the internal and external corrosion test of 12kg fire extinguisher.

Applicable to ISO 7165:1999 ,ISO 7165:2009,ISO 11601:1999,ISO 11601:2017 standard,for extinguishing Class A, B, and C fire performance test.

Compliant with ISO 7165-2009 standards,This Vibration Test machine is suitable for vibration test of 1-8 kg portable and dry powder fire extinguishers. 

This equipment complies with IEC 60060-1 standards,Test the high voltage test of the insulation layer of large wire and cable and coiled wire and cable.

The Tensile Test Apparatus Comply with IEC60811-1-4:1985 and other test standards. It is suitable for testing the tensile properties of wire and cable, rubber, plastic and other insulating sheaths in low temperature environment.

The Mineral Insulated Cable Flattening Test Equipment Comply with IEC60702-1: 2002 test standard. Applicable to mineral insulation flattening test of copper core copper or copper alloy sheath with diameter less than 25mm rated voltage 500V and 750V.

It is suitable for the maximum flattening force of 2 tons, the diameter is less than 10mm, and the rated voltage is 500V and 750V copper core copper or copper alloy sheathed mineral insulation flattening test.Comply with IEC 60702-1:2002 test standard.

Comply with IEC60227-1:2007, IEC60227-2:2003 test standard.It is suitable for the load breaking test of various copper-clad soft wires. Take a flexible cord sample of appropriate length, install one end on a rigid support, and hang a heavy hammer of 0.5kg from the sample at a distance of 0.5m below the support point. When the conductor passes。

Standard to American Fire Protection Association (NFPA) NFPA 701:2004 Test Method. It can be applied to single or multi-layer fabrics, but not for fabrics with a weight greater than 700 g/m2 (21 oz/yd2). 

Applicable to the adhesion strength test between fire hose linings (or outer cladding), that is, adhesion strength, elongation at break and strength at break test;

The Flammability Tester suitable for testing the flammability performance of various fabrics and their products by igniting the surface in a 45° direction, and for grading the burning performance.

Burning calorific value test equipment for building materials and products Comply with the test standards of ISO 1716-2002 "Reaction to fire test for building materials and products—Determination of the heat of combustion".