test

Comply with ASTM E162,ASTM D3675 standards, It is suitable for evaluating the performance of rail train materials such as single or composite rigid materials, materials with adhesive coating, and flexible materials with a thickness greater than 5 mm.

It meets the requirements of  ASTM D2863, BS ISO 4589-2, NES 714,It's suitable for evaluating the combustion performance of materials such as solid, laminated, foams, soft flakes and thin films under specified environments.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

This Testing equipment Comply with DIN 14521-1987 standards ,it is suitable for the sealing performance, pressure resistance performance, outer diameter expansion rate and axial elongation rate test of fire hose reels of water, dry powder and foam fire extinguishing agents.

It is suitable for spray gun drop test. Hang the spray gun on the test stand, drop it from a height of 1.5m, and impact it on a 10cm-thick reinforced concrete board. After the test, the spray gun should be free of cracking and deformation and can be used normally.

This Combustion Testing Equipment suitable for the non-prolonged combustion performance of aviation and aerospace wires and cables under the direct combustion of the specified fire source.

Meet the requirements of the ASTM D4151-2010,It is used to test the flame retardant properties of bed blanket fabrics and the flame spread properties on the surface of the fabrics. 

Heat Release Tester Comply with ISO 9705 and ISO 5660-1 test standard,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models

 It is suitable for evaluating the performance of rail train materials such as single or composite rigid materials, materials with adhesive coating, and flexible materials with a thickness greater than 5 mm.

Comply with ISO 5658-2 standards,It is suitable for testing the surface characteristics of flat single materials, composite materials or components used on exposed surfaces of buildings and transportation vehicles (such as ships, trains, etc.), and tubular products through special installation and fixing.

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.

This Smoke Density Chamber Compliant with BS EN ISO 5659, ASTM E662 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.

It is suitable for the combustion performance test of non-metallic materials in the aircraft cabin,Comply with the standard requirements of FAR25.853.

Heat Release Tester Apparatus is suitable for the combustion performance test of cables and optical cables used in construction projects.Comply with EU standard EN 50575 and EN 50399.

This Combustion Tester Equipment Comply with ISO 1716-2002 standards,The test of determination of the heat of combustion of building products at constant volume in a bomb calorimeter including gross heat and net heat of combustion.