ul

Thermal Stability Test Apparatus Comply with IEC 60811-3-2: 1985 test standard requirements.It is applicable to the insulation and sheath test of polyvinyl chloride compound for wire and cable.

This Extrusion Test Apparatus Comply with UL758-2016,Suitable for 20AWG~14AWG insulated wire anti-extrusion test.

The Testing Machine Comply with UL758 standards,This equipment is used to test the degree of thermal deformation of materials such as plastics and wire rubber.

Flex Tester Machine Meet the standard requirements of UL 1581. After 15,000 reciprocating movements of the flexible cable used to detect rubber insulation and sheath, that is, 30,000 single-way movements, neither current interruption nor short circuit between conductors should occur.

This Flammability Tester Comply with ASTM D3014-04a, ISO 3582, UL94 HBF, HF-1, HF-2 test standards.It is suitable for evaluating the vertical combustion performance of rigid foam plastics under laboratory conditions and specifies the vertical combustion method to determine the combustion performance of rigid foam plastics.

The Flame Retardant Tester Comply with UL1581 standards,It is suitable for wire and cable insulation flame resistance test;

It is suitable for the impulse shock resistance test of fire emergency lights.

Comply with ISO 7165 and ISO 11601 standard,It is suitable for electrical insulation performance test of water-based fire extinguisher when spraying.

 It is suitable for the electrical insulation performance test of powder extinguishing agent, and the electrical insulation is ≥5kv.

Impact Testing Machine Comply with Section 1400 of UL1581-2016 and Section 7.13.2 of UL2556-2015 and Figure 16.Applicable to the verification of the impact resistance of insulation and/or covering wires and cables when struck by a free-falling weight.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

It is suitable for spray gun drop test. Hang the spray gun on the test stand, drop it from a height of 1.5m, and impact it on a 10cm-thick reinforced concrete board. After the test, the spray gun should be free of cracking and deformation and can be used normally.

Comply with ISO 5658-2 standards,It is suitable for testing the surface characteristics of flat single materials, composite materials or components used on exposed surfaces of buildings and transportation vehicles (such as ships, trains, etc.), and tubular products through special installation and fixing.

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.

Comply with the test standard of ISO 9239 and ASTM E648,This test method is applicable to all kinds of flooring materials,Such as: textile carpet, soft wooden board, wood board, rubber board and plastic floor and floor spraying material.