The Flame Propagation Test Apparatus Comply with IEC60332-1-1:2004 and IEC60332-1-2:2004 standard,It is suitable for measuring the non-continued burning after extinction of burner performance of single plastic wire, control, cross-linking, elevator, marine, mining cable, etc.
The Vertical Fire Resistance Test Furnace,suitable for evaluating the fire resistance of products such as fire doors installed at the openings of vertical partition members, fire shutter assemblies, fire bricks, fire glass, fire partition walls and fire windows.
The Combustion Tester Comply with the standard requirements of IEC60331,It is suitable for testing whether the wire or optical cable maintains the circuit integrity during the fire supply under the flame of at least 750℃ and 830℃.
The oxygen consumption rate calculated from the oxygen concentration in the combustion product gas stream, as well as the heat release rate during combustion, are critical parameters for evaluating the combustion performance of materials. Accurately measuring the heat release rate during the combustion process is crucial for predicting fire hazards and for flame-retardant treatments. This process complies with the following test standards: ISO5660-1/-2, ASTM E1354, ASTM E1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN/ULC-S135, and BS 476.
Flame Spread Testing Machine is suitable for judging and evaluating the ability of vertically bundled wires and cables or optical cables to inhibit the vertical spread of flames under specified conditions.Compliant with IEC 60332 standards.
Flooring Radiant Heat Flux Test Apparatus Comply with the test standard of EN ISO9239-1:2002,ASTM E648-2014,This test method is applicable to all kinds of floorings.
The design of this instrument meets the requirements of ISO 5725-1(2):1994, EN 136011, EN 13238.Single Burning Item Fire Testing Equipment is suitable for evaluating the fire performance of flat building products.
Smoke Density Chamber is used to measure the density of smoke released when cables and optical cables are burned under specific conditions.Compliance with IEC 61034.
It is used to measure the total amount of halogen acid gas in low-halogen and halogen-free flame retardant cables and measure the acidity of the gas by measuring PH value and conductivity.
This Impact Testing Machine is suitable for mechanical shock resistance test of flexible rubber-sheathed cables for mining purpose below 6KV.
ISO 19700 Smoke density testers are used to determine the fire resistance and smoke-generating characteristics of materials such as plastics, rubber, textiles, and other materials.
Mineral Insulated Cable Bending Test Apparatus Comply with the standard requirements of IEC 60702-1:2002, IEC 60684-2:2011, BS 6387:2013, and BS 8491:2008.It is suitable for bending performance test of copper core copper or copper alloy sheathed mineral insulated general wiring cables with rated voltage of 500V and 750V.
The Fire Resistance Tester Comply with DIN 4102 and GB/T 8625-2005 "Test method of difficult-flammability for building materials"This standard applies to the determination of the flame retardancy of building materials.
Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line.
Oxygen Index Test Apparatus Comply with JIS7201, BS2782, ANSI/ASTM, D2863, ISO4589-2:1996 test standards.suitable for homogeneous solid materials, laminates, foam materials, soft sheets and film materials with apparent density greater than 100kg/m³
WhatsApp:
Mobile Phone:
Contact Now
