Select by Industry

Smoke Density Chamber is used to measure the density of smoke released when cables and optical cables are burned under specific conditions.Compliance with IEC 61034.

Wind Tunnel Test Rig is a suction type direct current wind tunnel. The air volume is adjusted by the damper at the outlet of the fan, and the air is sucked in from the suction port, and then passes through the inlet section, rectification section, contraction section, rectangular test section, variable diameter section, circular test section, measurement section, expansion section, fan and so on.

(SBI) Test Apparatus Complies with EN 13823:2002 Reaction to fire tests for building products—Building products excluding floorings exposed to the thermal attack by a single burning item.

Toxicity Index (CIT) Test Apparatus with BS EN 50305,EN 45545,DIN 14521 standards, It is suitable for non-metallic material toxicity index test of halogen-free, low-smoke, and low-toxicity wires, cables or optical cables.

The Flame Propagation Test Apparatus Comply with IEC60332-1-1:2004 and IEC60332-1-2:2004 standard,It is suitable for measuring the non-continued burning after extinction of burner performance of single plastic wire, control, cross-linking, elevator, marine, mining cable, etc.

Flooring Radiant Heat Flux Test Apparatus Comply with the test standard of EN ISO9239-1:2002,ASTM E648-2014,This test method is applicable to all kinds of floorings.

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

This Hydraulic Pressure Test Machine For Fire Extinguisher is suitable for water pressure sealing and strength test of sprinkler.

Compliant with ISO 2592 standards It is suitable for the determination of flash and fire points of petroleum products by the Cleveland open cup method. Flash point and fire point are used to evaluate the flammability and combustibility of substances.

This Automatic Pensky Martens Closed Cup Flash Point Tester Comply with ISO 2719-2016 and ASTM D93-2018 standards,It is suitable for determining the flash point of flammable liquids, liquids with suspended particles, liquids whose surface tends to form a film under test conditions, and other liquids by the Pensky-Martin closed cup method. 

This Impact Testing Machine is suitable for mechanical shock resistance test of flexible rubber-sheathed cables for mining purpose below 6KV.

Mineral Insulated Cable Bending Test Apparatus Comply with the standard requirements of IEC 60702-1:2002, IEC 60684-2:2011, BS 6387:2013, and BS 8491:2008.It is suitable for bending performance test of copper core copper or copper alloy sheathed mineral insulated general wiring cables with rated voltage of 500V and 750V.

Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line. 

ISO 19700 Smoke density testers are used to determine the fire resistance and smoke-generating characteristics of materials such as plastics, rubber, textiles, and other materials.