BS

Oxygen Index Test Apparatus Comply with JIS7201, BS2782, ANSI/ASTM, D2863, ISO4589-2:1996 test standards.suitable for homogeneous solid materials, laminates, foam materials, soft sheets and film materials with apparent density greater than 100kg/m³ 

Compliant with ISO 2592 standards It is suitable for the determination of flash and fire points of petroleum products by the Cleveland open cup method. Flash point and fire point are used to evaluate the flammability and combustibility of substances.

This NBS Smoke Density Chamber Compliant with BS EN ISO5659-2:2006,ASTM E 662:2006,ISO5659-2:2012 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

The Material Smoke Toxicity Hazard Classification Tester is a specialized instrument used to assess the toxicity of smoke produced when materials are burned. It is designed to measure and classify the hazardous components of smoke, such as toxic gases, that can pose risks to human health during fires

It can perform tests on national or international standards such as GB, ISO, ASTM, BS, DIN, JIS, etc. It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests

Fire Retardant Paint Testing Machine(small chamber method) is suitable for testing the fire-retardant performance of fire-resistant paints painted on the surface of combustible substrates under laboratory conditions.

It can perform tests on national or international standards such as ISO, ASTM, BS, DIN, JIS, etc.It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests ( Optional functions, additional fees).

It meets the requirements of  ASTM D2863, BS ISO 4589-2, NES 714,It's suitable for evaluating the combustion performance of materials such as solid, laminated, foams, soft flakes and thin films under specified environments.

This Smoke Density Chamber Compliant with BS EN ISO 5659, ASTM E662 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.

The Fire Resistance Test Equipment Comply with the standard requirements of ISO 8191.1:1988 and BS 5852-2006.use to Upholstered Furniture—Assessment of the resistance to ignition of mattress and sofa.