HomeProducts

DIN

(Total 35 Products)
Single Burning Item Fire Testing Equipment

The design of this instrument meets the requirements of ISO 5725-1(2):1994, EN 136011, EN 13238.Single Burning Item Fire Testing Equipment is suitable for evaluating the fire performance of flat building products. 

Bending test apparatus for MI cables

Mineral Insulated Cable Bending Test Apparatus Comply with the standard requirements of IEC 60702-1:2002, IEC 60684-2:2011, BS 6387:2013, and BS 8491:2008.It is suitable for bending performance test of copper core copper or copper alloy sheathed mineral insulated general wiring cables with rated voltage of 500V and 750V.

Difficult-flammability Test Apparatus Of Building Materials

The Fire Resistance Tester Comply with DIN 4102 and GB/T 8625-2005 "Test method of difficult-flammability for building materials"This standard applies to the determination of the flame retardancy of building materials.

Optical Cable Bending Tester

Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line. 

Two Station Flexible Cable Drag Chain Bending Test Apparatus

This Bending Test Apparatus Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.Compliance with TUV 2PFG2577-08.16, DIN VDE 0295, and the standard CRIA 0003.2-2016.

Four Station Flexible Cable Drag Chain Bending Test Machine

this machine is a four -site design of the front and rear,Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.

Fully Automatic Salt Spray Tester

Salt Spray Test Machine is aimed at the surface treatment of various materials.tests the corrosion resistance of its products.This product meets GJB150, DIN50021 continuous salt spray and other international standards; 

Smoke Detector Testing Equipment

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

Combustible Gas Detector High and Low Temperature Damp Heat Test Chamber

Suitable for industrial and commercial use point type combustible gas detectors, household combustible gas detectors, industrial and commercial portable combustible gas detectors, household and small catering kitchen gas alarms and sensors, household gas alarms and sensors. functional tests in high and low temperature, humid and hot environments;

Building Material Ignitability Fire Tester

The Building Material Ignitability Fire Tester Comply with the standard requirements of ISO5657-1997 "Reaction to fire tests—Ignitability of building products using a radiant heat source"

Sprinkler System Hydraulic Strength Testing Apparatus

This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.

Heat Release Rate Test Apparatus

Cone Calorimeter Comply with ISO 9705,ISO 5660 standards,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models.

Fire Emergency Lighting & Evacuation Indication System Testing Apparatus

It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

Material Smoke Toxicity Test Equipment

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

Electronic Tensile Testing Machine

Electronic Tensile Testing Machine can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).

Home

Product

Phone

About Us

Inquiry