Test Equipment

Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line. 

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

Combustion Test Equipment is suitable for testing the flame retardant properties of the insulating layer of wires and cables under abnormal conditions such as overheating and overcurrent.suitable for UL1581, UL13, UL444, UL1655 VW-1 and FT-1, FT-2 of CSA.

The Mineral Insulated Cable Flattening Test Equipment Comply with IEC60702-1: 2002 test standard. Applicable to mineral insulation flattening test of copper core copper or copper alloy sheath with diameter less than 25mm rated voltage 500V and 750V.

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for fire-fighting soft reel and fire-fighting water gun spray test.This equipment only includes fire hose reel jet test, fire water gun jet test and flow test;

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

This Crash Test Equipment Comply with IEC 61779: 2003,It is suitable for the collision performance test of combustible gas alarm controller and special fire detector.

It is suitable for the combustion performance test of non-metallic materials in the aircraft cabin,Comply with the standard requirements of FAR25.853.

This Tracking Test Equipment Compliant with IEC60587:2007 standards,suitable for evaluating tests using electrical insulating materials under severe environmental conditions by measuring resistance to tracking and corrosion with liquid contaminants and sloped specimens.

Burning calorific value test equipment for building materials and products Comply with the test standards of ISO 1716-2002 "Reaction to fire test for building materials and products—Determination of the heat of combustion".

Compliant with ISO 7165-2009 standards,This Vibration Test machine is suitable for vibration test of 1-8 kg portable and dry powder fire extinguishers. 

Fire Retardant Paint Testing Machine(small chamber method) is suitable for testing the fire-retardant performance of fire-resistant paints painted on the surface of combustible substrates under laboratory conditions.

This Bending Test Machine is suitable for lining fire hose and fire hose bendability test and fire hose test with hose specifications of 25, 40, 50, 65, 80 and 100.