astm

The oxygen consumption rate calculated from the oxygen concentration in the combustion product gas stream, as well as the heat release rate during combustion, are critical parameters for evaluating the combustion performance of materials. Accurately measuring the heat release rate during the combustion process is crucial for predicting fire hazards and for flame-retardant treatments. This process complies with the following test standards:  ISO5660-1/-2, ASTM E1354, ASTM E1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN/ULC-S135, and BS 476.

Flooring Radiant Heat Flux Test Apparatus Comply with the test standard of EN ISO9239-1:2002,ASTM E648-2014,This test method is applicable to all kinds of floorings.

ISO 19700 Smoke density testers are used to determine the fire resistance and smoke-generating characteristics of materials such as plastics, rubber, textiles, and other materials.

Oxygen Index Test Apparatus Comply with JIS7201, BS2782, ANSI/ASTM, D2863, ISO4589-2:1996 test standards.suitable for homogeneous solid materials, laminates, foam materials, soft sheets and film materials with apparent density greater than 100kg/m³ 

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

This Automatic Pensky Martens Closed Cup Flash Point Tester Comply with ISO 2719-2016 and ASTM D93-2018 standards,It is suitable for determining the flash point of flammable liquids, liquids with suspended particles, liquids whose surface tends to form a film under test conditions, and other liquids by the Pensky-Martin closed cup method. 

It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

This NBS Smoke Density Chamber Compliant with BS EN ISO5659-2:2006,ASTM E 662:2006,ISO5659-2:2012 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.

Meet the requirements of the ASTM D4151-2010,It is used to test the flame retardant properties of bed blanket fabrics and the flame spread properties on the surface of the fabrics. 

Comply with the test standard of ISO 9239 and ASTM E648,This test method is applicable to all kinds of flooring materials,Such as: textile carpet, soft wooden board, wood board, rubber board and plastic floor and floor spraying material. 

This Flammability Tester Comply with ASTM D3014-04a, ISO 3582, UL94 HBF, HF-1, HF-2 test standards.It is suitable for evaluating the vertical combustion performance of rigid foam plastics under laboratory conditions and specifies the vertical combustion method to determine the combustion performance of rigid foam plastics.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

The Material Smoke Toxicity Hazard Classification Tester is a specialized instrument used to assess the toxicity of smoke produced when materials are burned. It is designed to measure and classify the hazardous components of smoke, such as toxic gases, that can pose risks to human health during fires

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries. 

It can perform tests on national or international standards such as GB, ISO, ASTM, BS, DIN, JIS, etc. It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests