fire

The instruments designed by ZONSKY meet the requirements of ISO 5725-1(2):1994, EN 136011, EN 13238.Single Burning Item Fire Testing Equipment is suitable for evaluating the fire performance of flat building products. 

ISO 19700 Smoke density testers are used to determine the fire resistance and smoke-generating characteristics of materials such as plastics, rubber, textiles, and other materials.

The Fire Resistance Tester Comply with DIN 4102 and GB/T 8625-2005 "Test method of difficult-flammability for building materials"This standard applies to the determination of the flame retardancy of building materials.

The Combustion Tester Comply with the standard requirements of IEC60331,It is suitable for testing whether the wire or optical cable maintains the circuit integrity during the fire supply under the flame of at least 750℃ and 830℃.

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

Comply with ISO 11601:2017,It is suitable for the driving performance test of the trolley fire extinguisher.

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

This Hydraulic Pressure Comprehensive Testing Machine is suitable for fire hose test with hose specifications of 25, 40, 50, 65, 80, 100, 125, 150, 200. 

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for fire-fighting soft reel and fire-fighting water gun spray test.This equipment only includes fire hose reel jet test, fire water gun jet test and flow test;

(SBI) Test Apparatus Complies with EN 13823:2002 Reaction to fire tests for building products—Building products excluding floorings exposed to the thermal attack by a single burning item.

This Hydraulic Pressure Test Machine For Fire Extinguisher is suitable for water pressure sealing and strength test of sprinkler.

Compliant with ISO 2592 standards It is suitable for the determination of flash and fire points of petroleum products by the Cleveland open cup method. Flash point and fire point are used to evaluate the flammability and combustibility of substances.

The Fire Resistance Test Furnace suitable for the test of thermal insulation performance deviation and thermal insulation performance attenuation of steel structure fire retardant coatings.