test apparatus

The Flame Propagation Test Apparatus Comply with IEC60332-1-1:2004 and IEC60332-1-2:2004 standard,It is suitable for measuring the non-continued burning after extinction of burner performance of single plastic wire, control, cross-linking, elevator, marine, mining cable, etc.

Flooring Radiant Heat Flux Test Apparatus Comply with the test standard of EN ISO9239-1:2002,ASTM E648-2014,This test method is applicable to all kinds of floorings.

It is used to measure the total amount of halogen acid gas in low-halogen and halogen-free flame retardant cables and measure the acidity of the gas by measuring PH value and conductivity.

Mineral Insulated Cable Bending Test Apparatus Comply with the standard requirements of IEC 60702-1:2002, IEC 60684-2:2011, BS 6387:2013, and BS 8491:2008.It is suitable for bending performance test of copper core copper or copper alloy sheathed mineral insulated general wiring cables with rated voltage of 500V and 750V.

The Fire Resistance Tester Comply with DIN 4102 and GB/T 8625-2005 "Test method of difficult-flammability for building materials"This standard applies to the determination of the flame retardancy of building materials.

Oxygen Index Test Apparatus Comply with JIS7201, BS2782, ANSI/ASTM, D2863, ISO4589-2:1996 test standards.suitable for homogeneous solid materials, laminates, foam materials, soft sheets and film materials with apparent density greater than 100kg/m³ 

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

This Bending Test Apparatus Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.Compliance with TUV 2PFG2577-08.16, DIN VDE 0295, and the standard CRIA 0003.2-2016.

Oil Resistance Testing Machine is suitable for the oil resistance test of plastic with paint cables and insulation. Comply with UL, VDE, CSA, JIS and other standards.

this machine is a four -site design of the front and rear,Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.

This Carbon Black Testing Equipment Comply with IEC60811-4-1:2004 standard,Inner diameter and length of quartz tube: Φ30×(400±50) mm;

Extruded oversheaths abrasion test apparatus" refers to a testing device used to assess the abrasion resistance of extruded oversheaths, which are protective coverings typically applied to cables or wires. This apparatus is designed to evaluate how well these oversheaths withstand wear and tear

The Tensile Test Apparatus Comply with IEC60811-1-4:1985 and other test standards. It is suitable for testing the tensile properties of wire and cable, rubber, plastic and other insulating sheaths in low temperature environment.

Comply with IEC60227-1:2007, IEC60227-2:2003 test standard.It is suitable for the load breaking test of various copper-clad soft wires. Take a flexible cord sample of appropriate length, install one end on a rigid support, and hang a heavy hammer of 0.5kg from the sample at a distance of 0.5m below the support point. When the conductor passes。

Thermal Stability Test Apparatus Comply with IEC 60811-3-2: 1985 test standard requirements.It is applicable to the insulation and sheath test of polyvinyl chloride compound for wire and cable.