test equipment

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

Suitable for industrial and commercial use flammable gas detectors, home combatant gas detectors, industrial and commercial use portable combustible gas detectors, household and small catering kitchen gas alarm and sensor, household gas alarm, the functional tests of the sensor, and functional tests at high, low temperature, damp heat environment;

Suitable for industrial and commercial use point type combustible gas detectors, household combustible gas detectors, industrial and commercial portable combustible gas detectors, household and small catering kitchen gas alarms and sensors, household gas alarms and sensors. functional tests in high and low temperature, humid and hot environments;

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for fire-fighting soft reel and fire-fighting water gun spray test.This equipment only includes fire hose reel jet test, fire water gun jet test and flow test;

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

Mineral Insulated Cable Bending Test Apparatus Comply with the standard requirements of IEC 60702-1:2002, IEC 60684-2:2011, BS 6387:2013, and BS 8491:2008.It is suitable for bending performance test of copper core copper or copper alloy sheathed mineral insulated general wiring cables with rated voltage of 500V and 750V.

Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line. 

Comply with the standard requirements of ISO19700-2006,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

This Tracking Test Equipment Compliant with IEC60587:2007 standards,suitable for evaluating tests using electrical insulating materials under severe environmental conditions by measuring resistance to tracking and corrosion with liquid contaminants and sloped specimens.

This Bending Test Apparatus Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.Compliance with TUV 2PFG2577-08.16, DIN VDE 0295, and the standard CRIA 0003.2-2016.

Combustion Test Equipment is suitable for testing the flame retardant properties of the insulating layer of wires and cables under abnormal conditions such as overheating and overcurrent.suitable for UL1581, UL13, UL444, UL1655 VW-1 and FT-1, FT-2 of CSA.

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries.