test machine

this machine is a four -site design of the front and rear,Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise.

The Tensile Test Apparatus Comply with IEC60811-1-4:1985 and other test standards. It is suitable for testing the tensile properties of wire and cable, rubber, plastic and other insulating sheaths in low temperature environment.

The Mineral Insulated Cable Flattening Test Equipment Comply with IEC60702-1: 2002 test standard. Applicable to mineral insulation flattening test of copper core copper or copper alloy sheath with diameter less than 25mm rated voltage 500V and 750V.

It is suitable for the maximum flattening force of 2 tons, the diameter is less than 10mm, and the rated voltage is 500V and 750V copper core copper or copper alloy sheathed mineral insulation flattening test.Comply with IEC 60702-1:2002 test standard.

Salt Spray Test Machine is aimed at the surface treatment of various materials.tests the corrosion resistance of its products.This product meets GJB150, DIN50021 continuous salt spray and other international standards; 

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

This Hydraulic Pressure Test Machine For Fire Extinguisher is suitable for water pressure sealing and strength test of sprinkler.

It is suitable for the drop test of the flammable gas detector.The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm; 

It is suitable for impact resistance test of fire hose reel.Impact hammer: 25kg;Load hammer: 80kg;

This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

This Vibration Impact Test Machine Compliant with ISO 7165:2009 standards,It is suitable for the vibration impact test of 1~12kg portable fire extinguishers.

This Resistance To Corrosion Performance Test Apparatus Comply with IEC 60068-2-11:2021,ASTM G85-02,ISO 7165-2009 standards,Used in the internal and external corrosion test of 12kg fire extinguisher.