tester

Comply with HB horizontal burning test of UL 94-2012; ASTM D635; V-0 V-1 V-2 vertical burning test of UL 94-2012; ASTM D3801; IEC 60695-11-10 standard requirements.It is mainly used to measure the combustion performance of plastic or plastic parts and non-metallic materials under the condition of 50W flame, burning horizontally or vertically and to determine the plastic combustion level.

ISO 19700 Smoke density testers are used to determine the fire resistance and smoke-generating characteristics of materials such as plastics, rubber, textiles, and other materials.

The Fire Resistance Tester Comply with DIN 4102 and GB/T 8625-2005 "Test method of difficult-flammability for building materials"This standard applies to the determination of the flame retardancy of building materials.

Oxygen Index Test Apparatus Comply with JIS7201, BS2782, ANSI/ASTM, D2863, ISO4589-2:1996 test standards.suitable for homogeneous solid materials, laminates, foam materials, soft sheets and film materials with apparent density greater than 100kg/m³ 

The Combustion Tester Comply with the standard requirements of IEC60331,It is suitable for testing whether the wire or optical cable maintains the circuit integrity during the fire supply under the flame of at least 750℃ and 830℃.

Smoke Density Chamber is used to measure the density of smoke released when cables and optical cables are burned under specific conditions.Compliance with IEC 61034.

Electrical fire arc test machine Simulate the ignition process caused by electric circuit arc and the cause of fire formation.

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

Compliant with ISO 2592 standards It is suitable for the determination of flash and fire points of petroleum products by the Cleveland open cup method. Flash point and fire point are used to evaluate the flammability and combustibility of substances.

This Automatic Pensky Martens Closed Cup Flash Point Tester Comply with ISO 2719-2016 and ASTM D93-2018 standards,It is suitable for determining the flash point of flammable liquids, liquids with suspended particles, liquids whose surface tends to form a film under test conditions, and other liquids by the Pensky-Martin closed cup method. 

Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line. 

Comply with the standard requirements of ISO19700-2006,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

Oil Resistance Testing Machine is suitable for the oil resistance test of plastic with paint cables and insulation. Comply with UL, VDE, CSA, JIS and other standards.

This Tracking Test Equipment Compliant with IEC60587:2007 standards,suitable for evaluating tests using electrical insulating materials under severe environmental conditions by measuring resistance to tracking and corrosion with liquid contaminants and sloped specimens.