testing

The Combustion Tester Comply with the standard requirements of IEC60331,It is suitable for testing whether the wire or optical cable maintains the circuit integrity during the fire supply under the flame of at least 750℃ and 830℃.

Flame Spread Testing Machine is suitable for judging and evaluating the ability of vertically bundled wires and cables or optical cables to inhibit the vertical spread of flames under specified conditions.Compliant with IEC 60332 standards.

The design of this instrument meets the requirements of ISO 5725-1(2):1994, EN 136011, EN 13238.Single Burning Item Fire Testing Equipment is suitable for evaluating the fire performance of flat building products. 

This Impact Testing Machine is suitable for mechanical shock resistance test of flexible rubber-sheathed cables for mining purpose below 6KV.

The Fire Resistance Tester Comply with DIN 4102 and GB/T 8625-2005 "Test method of difficult-flammability for building materials"This standard applies to the determination of the flame retardancy of building materials.

Optical Cable Repeated Bending Testing Machine is suitable for determining the ability of optical cables to withstand repeated bending. The test equipment can make the sample bear the tensile load and at the same time bend 90° to the left and right sides of the plumb line. 

Combustion Test Equipment is suitable for testing the flame retardant properties of the insulating layer of wires and cables under abnormal conditions such as overheating and overcurrent.suitable for UL1581, UL13, UL444, UL1655 VW-1 and FT-1, FT-2 of CSA.

This equipment complies with IEC 60060-1 standards,Test the high voltage test of the insulation layer of large wire and cable and coiled wire and cable.

Oil Resistance Testing Machine is suitable for the oil resistance test of plastic with paint cables and insulation. Comply with UL, VDE, CSA, JIS and other standards.

This Carbon Black Testing Equipment Comply with IEC60811-4-1:2004 standard,Inner diameter and length of quartz tube: Φ30×(400±50) mm;

Extruded oversheaths abrasion test apparatus" refers to a testing device used to assess the abrasion resistance of extruded oversheaths, which are protective coverings typically applied to cables or wires. This apparatus is designed to evaluate how well these oversheaths withstand wear and tear

The Tensile Test Apparatus Comply with IEC60811-1-4:1985 and other test standards. It is suitable for testing the tensile properties of wire and cable, rubber, plastic and other insulating sheaths in low temperature environment.

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

This Hydraulic Pressure Comprehensive Testing Machine is suitable for fire hose test with hose specifications of 25, 40, 50, 65, 80, 100, 125, 150, 200. 

It is suitable for fire coupling drop test.Install the sample on the test bench so that the distance from the lowest point of the sample to the base is (1.5±0.05)m. After the sample is stationary, let it fall freely on the base. Check the sample for damage.