Comply with IEC60227-1:2007, IEC60227-2:2003 test standard.It is suitable for the load breaking test of various copper-clad soft wires. Take a flexible cord sample of appropriate length, install one end on a rigid support, and hang a heavy hammer of 0.5kg from the sample at a distance of 0.5m below the support point. When the conductor passes。
1. Scope of application:
It is suitable for the load breaking test of various copper-clad soft wires. Take a flexible cord sample of appropriate length, install one end on a rigid support, and hang a heavy hammer of 0.5kg from the sample at a distance of 0.5m below the support point. When the conductor passes。
2.Compliant standards:
Comply with IEC60227-1:2007, IEC60227-2:2003 test standard.
3. Main parameters:
3.1 Test station: 1;
3.2 Load drop height: 500mm;
3.3 Load drop method: free fall;
3.3 Load lifting method: the fixture on the lead screw drives the electromagnet to absorb the load and lift it automatically;
3.4 Load weight: 500g;
3.5 Load quantity: 1 piece;
3.6 Signal current (on-off current): AC 0.1A;
3.7 Signal voltage (on-off voltage): AC12V
3.8 Counter: 1 ~ 9999 continuous display and setting, when the count reaches the set value, it can automatically stop.
3.9 Power supply: AC220V, 50/60Hz.