Product Details

Emergency Lighting Test Equipment

Brief Introduction

ZONSKY Emergency Lighting Test Equipment is designed to assess the functionality, brightness, and reliability of emergency lighting and evacuation indicators under simulated fire conditions. This apparatus tests parameters such as luminance, battery backup duration, visibility in smoke-filled environments, and directional accuracy of exit signals. It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.

Quick Quote

Apparatus Details

In compliance with:

ISO 30061:2007
EN 1838
IEC 60598-2-22
NFPA 101
AS 2293.1: Emergency escape lighting and exit signs for buildings – System design, installation and operation

Main Performance Parameters

Charge and Discharge Test

Parameter	Specification
Battery charging test
Component surface temperature detection	Uses wire diameter thermocouple to detect surface temperature of internal components
Battery charging current detection	Detects overcharging current; maximum continuous current does not exceed 0.05Cₐ (0.05C₂₀A for lead-acid batteries)
Battery discharge detection
Termination voltage detection	Adjustable with power supply voltage adjustment function; range is 50%–150% of rated voltage
Discharge current detection	Detection range: 0.01mA–10mA; resolution: 0.01mA
Repeat conversion performance detection
Main power state time	0–99 minutes adjustable
Emergency state time	0–999 seconds adjustable
Repeat conversion times	0–999 times adjustable
State fluctuation performance test	Uses power supply with voltage adjustment function; range: 50%–150% of rated voltage
Conversion accuracy	Uses main power supply and voltage adjustment function; range: 50%–150% of rated voltage

Charge and Discharge Durability

Parameter	Specification
Charge and discharge endurance times	0–999 times adjustable
Full charge time record	0–999 hours
Discharge time record	0–999 minutes

Insulation Resistance Test

Parameter	Specification
Measurement range	1kΩ–10TΩ
Test voltage	DC500V ± 50V
Voltage measurement accuracy	±(2% + 2 counts) for voltages ≥ 500V DC
Resistance measurement accuracy	±(5% + 2 counts) for voltages ≥ 500V DC
Timing	60s ± 5s

Withstand Voltage Performance Test

Parameter	Specification
Test voltage	AC 0–5kV
Leakage current	AC 0–20mA
Test time	1–99 seconds
Transformer capacity	100VA
Measurement accuracy	±3% (±3 digits)

Grounding Resistance Test

Parameter	Specification
Simultaneous display	Displays test time, current, and resistance simultaneously
Constant current source	Provides stable test current
Test voltage	10V
Test current	5–30A
Test resistance range	0–600mΩ
Accuracy	±5% (±3 characters)