It is suitable for the drop test of the flammable gas detector.The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm;
ZONSKY Drop Test Apparatus for Combustible Gas Detectors is designed to evaluate the durability and impact resistance of gas detectors when subjected to accidental drops. This apparatus simulates drops from specified heights onto hard surfaces, assessing parameters such as casing integrity, sensor stability, and operational functionality post-impact.It is suitable for the drop test of the flammable gas detector.Put the sample on the test table and let it fall freely on the base. Each sample is repeatedly tested twice. Check whether the sample is damaged.
The mass is ≥2kg, the drop height is 1000mm; the mass is greater than 2kg and not greater than 5kg, and the drop height is 500mm; the mass is greater than 5kg, and the test cannot be performed.
compliance:IEC 60079-29-1；IEC 60079-0；UL 913；EN 50104；ANSI/ISA 12.13.01；
1. Test height: 30 ~ 1200mm adjustable;
2. Test height control accuracy: ± 0.05mm;
3. Platform: Made by 10cm reinforced concrete board;
4. Fixture: The electric clamping function is used.
5. Lift height: Pneumatic control
1. When connecting the gas source, it must be connected correctly according to the equipment.
2. This device needs to be placed in dry indoor environment without direct sunlight.
3. After the test is done, the qi source must be closed in time.
4. Rust-proof oil should be sprayed on the surface of this device regularly to prevent rust and being corroded.
WhatsApp:
Mobile Phone:
Contact Now
