Fire Extinguisher Impact Testing Apparatus

What is the Fire Extinguisher Impact Testing Apparatus?

ZONSKY Fire Extinguisher Impact Testing Apparatus is designed to assess the durability and structural integrity of fire extinguishers under impact forces. This apparatus simulates drops, collisions, or accidental impacts by applying controlled force to the extinguisher, evaluating parameters such as casing resilience, seal integrity, and functional readiness after impact. 

Test method: Put the fire extinguisher upright, make the axis of the steel hammer coincide with the axis of the fire extinguisher, and then the steel hammer falls freely to impact the head part of the fire extinguisher.Then place the fire extinguisher horizontally, with the headrest resting on the steel block, so that the center of the steel hammer hangs in the middle of the fire extinguisher head, and then the steel hammer falls freely to impact the fire extinguisher head part.

Compliance：DIN 14521-1987、NF S61-820-1/IN12010、NF S61-820-2/IN12010

Main parameters:

1.The height of the bottom surface of the steel hammer from the top of the fire extinguisher head: 0.3~1.0m adjustable, tolerance: ±2mm;

2. Steel hammer specification: diameter is 75mm, weight is 4kg±0.1kg;

3. The lifting method of the hammer body: the stepper motor is used to drive the sprocket and chain transmission to realize the lifting and lowering of the hammer body. The height of the hammer body can be arbitrarily set according to the needs. Ascent speed: 500mm/min;

4. Impact height positioning: The limit switch positioning protection is adopted, and any height positioning can be set.

5. Lifting height: AC motor drive;

6.Steel hammer weight accuracy: ±0.1kg

7. Height display: scale ruler with a resolution of 1.0mm

8. Working power supply: AC220V/50Hz; 120W

9. Dimensions: L1250*W600*H2100 mm

10. Weight: about 80kg.