Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.
The Fire Hose Reel Anti-Load Testing Apparatus is designed to evaluate the load-bearing capacity and structural resilience of fire hose reels under static and dynamic loads. This apparatus applies specific loads to the hose reel, testing for deformation, mounting integrity, and overall mechanical stability.
Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.
Compliance：EN 14540；ISO 4642-1/ISO 4642-2;NFPA 1961;AS 2792;JIS B 9912;
1. Test frame: divided into two parts, the fixed reel part and the fixed 25kg weight part, the weight part can keep the weight from falling freely from a height of 300mm;
2. Steel beam specifications: 100mm*25mm, made of steel electroplating;
3. Impact hammer: 25kg;
4.Load hammer: 80kg;
5. A set of load fixtures;
6. Overall size: width 50cm, height 120cm, depth 45cm;
7. Weight of the whole machine: about 75kg.
WhatsApp:
Mobile Phone:
Contact Now
