Bring to the table win-win survival strategies to ensure proactive domination. At the end of the day, going forward.
Low Temperature Tensile Tester
Tensile Test Machine For Wire & Cable Low Temperature ZONSKY Low Temperature Tensile Tester for Wire and Cable at Low Temperature is designed to evaluate the […]
Tensile Test Machine For Wire & Cable Low Temperature
ZONSKY Low Temperature Tensile Tester for Wire and Cable at Low Temperature is designed to evaluate the tensile strength and elongation properties of wires and cables under subzero conditions. This apparatus applies controlled tensile loading while maintaining a specified low temperature, enabling the assessment of mechanical performance and material integrity at reduced temperatures.Talk To Our Team
Key parameters measured include yield strength, ultimate tensile strength, and ductility. This machine is essential for testing the tensile properties of wires, cables, rubber, plastic, and their insulating sheaths in low-temperature environments. Note: This instrument does not include a low-temperature chamber; an external one is required.
Compliance
IEC 60811-4-1: 1985
EN 60811-1-4
ASTM D 573
ISO 188
BS 7870-2
Low Temperature Tensile Testing Machine Technical Parameters
Parameter
Specification
Machine Size
420L × 320W × 340H (mm)
Operating Temperature
-40°C
Maximum Stretching Length
220mm (displacement distance)
Specimen Specifications
Applicable to Type I and II dumbbell pieces (GB/T2951.14-2008 Figure 3 & Figure 4)
Fixtures
Non-self-tightening, three sets of six fixtures, capable of testing three samples simultaneously
Distance Between Left & Right Fixtures
Adjustable: 22mm or 30mm
Tensile Speed
25±5 mm/min
Tensile Accuracy
±0.5%
Display
Digital display, automatically calculates stretch length; includes break-stop function for individual sample monitoring
Power Requirements
AC220V (±10%), 50Hz
Machine Operating Power
400W
Equipment Structure
Control and Stretching Parts
The machine is divided into two sections: a control panel and a stretching unit.
During testing, the stretching unit is placed inside the low-temperature chamber, while the control panel remains outside.
Clamps & Fixtures
The stretching device contains two sets of clamps: one fixed and one movable.
The fixed clamps hold the samples in place, while the movable clamps apply the tensile force.
