Product Details
ZY6125-PC Surface Burning Performance Test Apparatus
Brief Introduction
The Radiant Panel Test Apparatus delivers accurate fire-behavior data by simulating the extreme thermal radiation of a developing room fire.
Highlights / Outstanding Features / Characteristics
- Radiant Heat Simulation: Subjects material surfaces to a controlled, high-intensity radiant heat source to replicate realistic fire conditions.
- Flame Propagation Tracking: Measures the exact speed (spread rate) and physical distance (extent) that flames travel across the specimen surface.
- Surface Safety Analysis: Essential for evaluating and certifying surface flammability levels for building materials, textiles, and coatings.
Description
In compliance with:
- NF P92-501 – Safety against fire: Building materials – Reaction to fire tests. Used for rigid or flexible materials thicker than 5mm.
- TB/T 2639.1 – Radiation test method for fire resistance of materials for railway vehicles.
- ASTM E162
- ASTM D3675
Main parameters
Test Data:
- A: Flame uniform height index
- S: Longest flame index
- C: Burning fever index
Radiation Test Casing:
- Height: 1010mm
- Length: 760mm
- Width: 463mm
- Constructed from a stainless steel test box
- Interior lined with flame-resistant material
- Transparent observation window for monitoring
- Stainless steel tubular air inlet device with a filter to shield indoor pollution sources
Radiator:
- Power: 500W
- Equipped with a 100mm quartz disk as the radiation surface
Sample Support Frame:
- Positioned at a 45-degree test angle
- Includes a stainless steel indicator ruler to calculate flame spread interval
Protective Net:
- Constructed from steel wire with a 3mm diameter
Ignition Device:
- Two movable ignition points:
- One positioned at the lower part of the sample
- The other at the upper part of the sample
- Equipped with control valves for gas flow
Temperature Measurement:
- Uses thermocouples at the top and air inlet
- Displays numerical values of temperature differences in real time
Control System:
- Managed by a microcomputer and software
- Automatically calculates flame index and combustion fever index
- Outputs and prints test results
