Electronic Tensile Testing Machine can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).
It is suitable for wire and cable testing, hardware, rubber and plastic, paper products, color printing packaging, adhesive tape, luggage and handbags, textile, medicine, daily chemical, food, electronics and other industries. It can do various materials, semi-finished products and finished products in the form of pulling, pressing, bending, folding, shearing, tearing, peeling and other forms of testing(functional optional).
1. Precise transmission mechanism: high-precision, no-gap ball screw and imported wear-resistant belt are used as the transmission system, with no noise, smooth operation and long service life;
2. Advanced control method: microcomputer data acquisition and control, high control precision, stable performance, and breakpoint shutdown function;
3. Force value accuracy: The force value accuracy is better than level 1, the force value resolution is 1/200,000, and the deformation measurement resolution can reach 0.0001mm;
4. Display: 5-inch touch screen display. Parameter setting is touch setting;
5. Clamps: it can help the buyer to customize clamps; (this equipment only contains one test sample clamp, if you need to test multiple samples, the clamps need to be customized, and the cost will be charged separately).
6. Two-point extension test device: It can be read directly on the touch screen.
Product model | ZY6010-SC-xx kg |
Capacity selection | 2, 5, 10, 20, 50, 100, 200, 500kg optional |
Monitor | Strength and Extension Display |
Power unit switch | kgf,gf ,N,kN |
Stress unit switching | MPa,kPa,kgf/cm2 |
Deformation unit switching | mm,cm,in |
Stop mode | Upper and lower limit safety setting, emergency stop button, program force and elongation setting, test piece damage detection |
Way of taking points | During the test, manual point picking and preset point picking (20 points) functions |
The standard configuration | 1 standard clamp, 1 equipment power cord, 1 product certificate, 1 product warranty card |
Machine size | About 57×47×120cm(W×D×H) |
Machine weight | About 45kg |
Power | Stepper motor |
Power supply | 1PH, AC220V, 50/60Hz, 10A or specified |