Two Station Flexible Cable Drag Chain Bending Test Apparatus

What is the Two Station Flexible Cable Drag Chain Bending Test Apparatus？

ZONSKY Suitable for high-flexible cables such as TUV, VDE, UL, repeated U-shaped bending fatigue tests, and need to be curved in high-speed exercise. Such as the repeated bending fatigue test of the internal display of the machine, the high-speed dragging system cable, the connected cable of the machine activity component, the internal wiring of the machine, and the industrial dragging cable, and the industrial robot cable.

It is mainly used to detect whether the flexible wires and cables are driven by the dragging chain. After repeated high-speed U-shaped bending tests, whether the short-circuit, the insulation sheath is cracking, damaged or other abnormal phenomena. It detects the performance of plastic deformation in the repeated high-speed U-shaped bending test and the shortcomings that are highlighted.

compliance:TUV 2PFG2577-08.16, DIN VDE 0295, and the standard CRIA 0003.2-2016 "Special cables for Industrial robots Part 2: Test Method" for the Standard CRIA 0003.2-2016.

Main features:

1. Control and settings: Test speed, number of tests, and trial process can be set;

2. Use PLC+touch screen control;

3. Adopt a servo motor+module structure.

4. Technical parameters:

4.1 Testing station: At the same time, you can test the two groups and use the sample of the front and rear installation;

4.2 Test method: horizontal bending, the sample is fixed in the corresponding dragging chain, followed by the dragging chain as a horizontal direction bending test;

4.3 Power off signal voltage: DC24V

4.4 Test space: maximum installation of dragging chain width 80mm;

4.5 Sample types: single-rooted line diameter ≤15mm; flat row width ≤50mm, height ≤15mm. Suitable for multi-core lines, short-circuit testing is connected in series;

4.6 Running itinerary: 200-1000mm can be set

4.7 Test speed: 60 times/minute;

4.8 Bending radius: Fixed height 30mm-150mm adjustment up and down, suitable for dragging chains with a curved radius of 15mm-75mm (according to the diameter of the sample with a suitable drag chain, this machine contains only one.)

4.9 counting digits: 0-99999999 settings at any setting;

4.10 Transmission mechanism: Using servo motor, module structure

4.11 servo motor: power 400W