Fully Automatic Salt Spray Tester

Wat is the Fully Automatic Salt Spray Tester？

ZONSKY Fully Automatic Salt Spray Tester is a specialized apparatus used to evaluate the corrosion resistance of materials and coatings in a controlled salt mist environment. This equipment automatically regulates the concentration, temperature, and duration of the salt spray exposure, simulating harsh marine or industrial conditions. Key parameters assessed include corrosion rate, surface degradation, and coating adhesion, providing essential data for determining the material's durability and suitability for corrosive environments。

Salt Spray Test Machine is aimed at the surface treatment of various materials. It contains hardware electroplating, hardware, electronic parts, chemical coatings, baking paint, cars, motorcycles, hardware cleaning tools, screws, springs, magnetic materials, organic and inorganic skin films, anode treatment, anti-rust oil and other industries, and tests the corrosion resistance of its products.

compliance: GJB150, DIN50021 continuous salt spray and other international standards; our company's test apparatus has passed the detection of the national environmental test equipment testing center.

Main parameters:

1. Internal size: W × D × H 900*600*500mm

2. Temperature range: RT+10 ° C ~ 55 ° C

3. Humidity range: ≥93%R.H

4. temperature uniformity: ± 2 ℃

5. temperature volatility: ± 0.5 ℃

6. Salt mist sinking amount: 1 ~ 2ml/80c㎡

7. Spray method: continuous/cycle, optional

8. Test method: neutral salt spray test (NSS test), acetate salt spray test (ASS test), salt spray test (SS test) Copper accelerated salt spray test (CASS test) and other salt spray test methods

9. Sample rack: The sample rack can meet the tilt test of 15 ℃ ~ 30 ℃ (two layers)

10. Air compressor Model: V-0.013/12.5 (self-provided by customers); exhaust pressure: 1.25m; volume flow: 0.13m3/min

Box body production materials:

1. The overall salt spray test box is made of imported PVC to enhance the hard-quality plastic board. The surface is smooth and flat, and it is resistant to aging and corrosion. This can prevent the material of FRP from surface fading and fibrosis due to time. The full-plastic structure salt spray test box can better meet the long-term strong acid and strong salt mist test without any damage.

2. Boxing lid is made with a full transparent imported impact plate, which is convenient for testing samples to be observed and tested during testing. The lid and the box are sealing with water to prevent the leakage of salt mist.

3. Installation requirements: power supply 220V, single phase 3kW, 50/60Hz

4. Heating system: The test temperature in the box is heated and humidified. The heating device uses an advanced titanium alloy protected tube, and the built -in nickel chromium alloy is far infrared thermal core. The temperature is fast and evenly distributed. And it saves about one-half compared to the heating power consumption of the glass fiber reinforcement box.